QNAP QSW-M2106R-2S2T network switch Managed L2 10G Ethernet (100/1000/

GBP 391.25 There are 3 offers for this product.

The QSW-M2106R-2S2T is a Layer 2 Web Managed Switch with two 10GbE SFP+ fiber ports. two 10GbE RJ45 ports and six 2.5GbE RJ45 ports. Supporting Layer 2 switching and network management via a user-friendly web user interface. the QSW-M2106R-2S2T offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution. With a half-width design. two QSW-M2106R-2S2T can be installed in a 1U rack space for space-saving.10GbE connectivityIncludes two 10GbE SFP+ fiber ports (Backward compatible with 1G SFP) and two 10GbE RJ45 ports. compatible with NBASE-T technologies to support five speeds (10G / 5G / 2.5G / 1G / 100M) for high-speed networks.2.5GbE connectivitySix 2.5GbE RJ45 ports allow you to immediately multiply your network speed by 2.5 times while using existing Cat 5e cables.User-friendly management interfaceThe QNAP Switch System (QSS) is easy to use and provides an overview dashboard. port management and setting guide. making central network management intuitive.Layer 2 networkProvides Layer 2 management features (such as LACP. VLAN. ACL and LLDP) for IT staff to efficiently control network bandwidth and enhance security.RSTPOne of the few web-managed switches that supports Rapid Spanning Tree Protocol (RSTP). Easily and efficiently deploy small/medium-scale networks that support expansion. redundancy. and loop prevention.Online firmware updateQSS can be updated with just one click. helping IT staff ensure their network security.Half-width design. two models in 1UWith a half-width rackmount design. a QSW-M2106R-2S2T can be installed in a 1U rack space with another half-width rackmount switch (such as QSW-M2108R-2C) for efficient physical space utilization and tidy cabling.Flexible deployment with multiple 10G SFP+ fiber and Gigabit portsThe QSW-M2106R-2S2T provides two 10GbE SFP+ ports. two 10GbE RJ45 ports and six 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces. Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T™ devices through RJ45 Category 6a (or better) cabling. The switching capacity of the QSW-M2106R-2S2T is 110Gbps. guaranteeing the full potential of each port.